Comments on: Installing & upgrading CQRLOG on a Raspberry Pi

By: Roger

Roger — Tue, 21 Jun 2022 10:28:18 +0000

Hi Mike

Just gave the above suggestion a try and it worked perfectly in Bullseye.

Thanks for your help.

73 de Roger.

By: Mike Richards

Mike Richards — Sat, 18 Jun 2022 17:52:31 +0000

In reply to Roger.

Hi Roger,

It seems that Free Pascal 3.0.4 is not available in Bullseye, but you should be able to substitute with fp*3.2.0 and fpc*3.2.0
If that doesn’t work, let me know and I’ll take a deeper look.

Regards,

Mike – G4WNC

By: Roger

Roger — Fri, 17 Jun 2022 11:31:59 +0000

Hi Mike
I’ve successfully run this procedure 2 or 3 times on Buster. However, when running the line: “sudo apt install -y lcl*2.0 lazarus*2.0 fp*3.0.4 fpc*3.0.4 libssl-dev” in Bullseye I get the following response:
E: Unable to locate package fp*3.0.4
E: Couldn’t find any package by glob ‘fp*3.0.4’
E: Unable to locate package fpc*3.0.4
E: Couldn’t find any package by glob ‘fpc*3.0.4’
The subsequent make command unsurprisingly fails.
Do you know if this procedure stills works in Bullseye?
73 de Roger.

By: Mike Richards

Mike Richards — Tue, 08 Feb 2022 16:06:19 +0000

In reply to GOPAN(VU2XTO). Glad to be of service. Mike - G4WNC

By: GOPAN(VU2XTO)

GOPAN(VU2XTO) — Mon, 07 Feb 2022 17:07:02 +0000

Mike thank you very much… I have installed … working perfect.. VU2XTO

By: Mike Richards

Mike Richards — Sat, 15 May 2021 13:05:45 +0000

In reply to Robert.

Hi Robert,

Thanks for the feedback. Mike – G4WNC

By: Robert

Robert — Fri, 14 May 2021 22:49:59 +0000

Thanks , Now got CQRLOG 2.5.2 working !!!!

By: Frank

Frank — Fri, 05 Feb 2021 11:26:47 +0000

Hello MIke,
Thanks for the tutorial.
Everthing seems to be installed correctly and cqrlog is starting up.
But I cannot connect t wsjtx.
During installing there was this text:

9015) Linking /home/pi/cqrlog/src/cqrlog
cqrlog.lpr(96) Warning: (9034) “crtbegin.o” not found, this will probably cause a linking failure
cqrlog.lpr(96) Warning: (9034) “crtend.o” not found, this will probably cause a linking failure
/usr/bin/ld.bfd: warning: /home/pi/cqrlog/src/link.res contains output sections; did you forget -T?
(1008) 100794 lines compiled, 93.4 sec
(1021) 23 warning(s) issued
strip src/cqrlog
gzip tools/cqrlog.1 -c > tools/cqrlog.1.gz
pi@raspberrypi:~/cqrlog $

So the question is:
What went wrong and how can I fix it?

With kind regards
73

By: Mike Richards

Mike Richards — Wed, 30 Dec 2020 23:47:06 +0000

In reply to Kevin Utzy.

Hi Kevin,

Apologies for the late reply. You could remove Lazarus but you’ll probably need to reinstall it when the next upgrade is released. Unless you’re short of space, I would leave it.

Mike – G4WNC

By: Frank

Frank — Fri, 11 Dec 2020 15:59:06 +0000

Hi Mike,
thank you! Worked like a charm (running CQRLOG 2.4.0 on RPi4 now)!
Regards,
Frank – DK2FL