Comments on: WSJT-X 2.3 – Transmit Audio Failure with PiOS https://photobyte.org/wsjt-x-2-3-transmit-audio-failure-with-pios/ Freelance Technical Author, Illustrator & Photographer Mon, 30 May 2022 07:45:00 +0000 hourly 1 https://wordpress.org/?v=6.8.1 By: James W8ISS https://photobyte.org/wsjt-x-2-3-transmit-audio-failure-with-pios/#comment-342472 Mon, 30 May 2022 07:45:00 +0000 https://photobyte.org/?p=10135#comment-342472 In reply to Frank Johnson.

I have found that when wsjt is “locked into run mode”‘
opening a terminal screen (ctl-alt-t) then opening top,
i can kill wsjt and go from there without having to reboot.

same under Ubuntu.

hope this helps some.

]]> By: Mike Richards https://photobyte.org/wsjt-x-2-3-transmit-audio-failure-with-pios/#comment-298360 Wed, 16 Feb 2022 09:45:04 +0000 https://photobyte.org/?p=10135#comment-298360 In reply to Julius Madey K2KGJ.

It’s probably worth upgrading to the latest version of WSJT-X. On the Pi you can use my instructions HERE to easily build from source. It appears to be working fine here, though I don’t have any Icom rigs to test with.

Regards,

Mike

]]> By: Julius Madey K2KGJ https://photobyte.org/wsjt-x-2-3-transmit-audio-failure-with-pios/#comment-298346 Wed, 16 Feb 2022 05:15:12 +0000 https://photobyte.org/?p=10135#comment-298346 In reply to Frank Johnson.

I have the same problem with a Raspberry Pi 3B+. Using a 705 with latest firmware version. The only thing WSJTS 2.3.0 accepts is default. Rejects any other choice. No audio in or out; alsamixer settings make no difference.
When I try to close WSJTX and restart, the process is still running.

]]> By: Frank Johnson https://photobyte.org/wsjt-x-2-3-transmit-audio-failure-with-pios/#comment-294932 Fri, 04 Feb 2022 12:18:16 +0000 https://photobyte.org/?p=10135#comment-294932 It’s not just the Pi that is affected.
I have the same problem with Ubuntu 21.04 and also 21.10 but in my case, selecting the Alsa device directly still doesn’t work.
In fact, there is no option that works.
After closing WSJTX, the “wsjtx” process is still running with 100% CPU.

I also think that WSJTX’s list of sound devices lists a lot of option that shouldn’t be there….

]]> By: Dave https://photobyte.org/wsjt-x-2-3-transmit-audio-failure-with-pios/#comment-293096 Sat, 29 Jan 2022 07:48:29 +0000 https://photobyte.org/?p=10135#comment-293096 Thank you this saved my bacon!

]]>